After we have made a wide range of diverse very good fly-tying materials available to you, we made an effort to produce a fly-tying tool reflecting the quality of our fly-tying materials.

Our employee Christian Kuchelmeister thought a lot about design and practical application and developed a tool in an unrepresented quality and function.

Now we can present you the result of our efforts: our "multiclamp". The modern material clamp is made of high-strength stainless steel. The surface is not dazzling. The design is modern but at the same time trimmed for functionality. The clamping range is open so that it is possible to bundle up and work on the trapped material with your thumb and forefinger without any other tools. The jaw is pointed shaped thus it is possible to go directly into the deer hair. Therefore you can take it over the entire jaw width into the dubbing loop. Moreover, artificial material like craft-fur or fake-fur can be picked up directly out of the mat into the clamp. Thus, our multiclamp can be used not only for traditional fly-tying with our CDC materials. So, we address also fly-tiers who must get much artificial material into the loop by tying streamers. A ruler in a 5-mm graduation is lasered on at the jaws so that the material can be tied in in the same amount every time. Another advantage has our multiclamp while using coarser hair dubbing. The loose hair can be picked up from the table because of a small radius at the clamping edge.

Our multiclamp is a non-daily multifunctional tool exceling the quality of previous tools. A tying tool in Swiss quality.

High-strength non dazzling model
High quality, whole clamp is made of stainless steel
High clamping force
Open clamping range
Material can be picked up directly out of the hide
Material can be bundled up directly through the open clamping range
Ruler at the jaws so that the amount of material is the same every time
Loose hair can be picked up directly from the table

Turbo Dubbing Spinner

T8611

Regular price $17.25

Shipping calculated at checkout.

This is the style dubbing spinner used to create the dubbing loops we feature on many of our videos. The head has three interchangeable attachments for different types of dubbing loops. It also doubles as a hair packer.

Loon Gator Grip Dubbing Spinner

F0983

Regular price $17.99

Shipping calculated at checkout.

The ultimate dubbing spinnner. Developed directly as a co-op with Loon, the Gator Grip Dubbing Spinner includes two tips for any spinning scenario a tyer might encounter from complex twists to dubbing loops. The octagonal anti-rolling technology ensures that the tool stays put on the tying desk, while the ring shape allows for smooth consistent tension while palmering.

Gator-grip tip

Dubbing loop hook

Octogonal anti-rolling technology

Ring allows for consistent tension in palmering.

Powder coated handle

Works in all spinning scenarios

Tightly angled flat jaws

Comfortably sized finger/thumb loops

Works with flies of all sizes

Stonfo Elite Rotodubbing Twister

FO612

Regular price $55.99

Shipping calculated at checkout.

The Stonfo Elite Rotodubbing twister is the Ferrari of dubbing twisters. Ultra-smooth spin and a genius thread tension system to keep the loop in place. It also has a very convenient head tilt feature to help you keep your dubbing loop in the proper orientation as you wrap the hook or need to adjust angles for specific patterns.

Hackle and Hook Pliers

HHP

Regular price $4.50

Shipping calculated at checkout.

Hackle and hook pliers. Quick clip, holds tight. These are some of the more affordable yet, good quality pliers out there.

Griffin Montana Mongoose Vise

GRFMON

Regular price $225.00 Sale price $195.00 Save $30.00

Shipping calculated at checkout.

The Griffin Montana Mongoose Vise is easily the vise we use the most. It has supreme hook holding capability and can adjust quickly and easily to accommodate really any size hook. With smooth rotary action, the best material clip we've seen and a few other key features, you'll not find a better vise for the money!

NOTE: This is the same vise with all the same features (c-clamp, pedestal, material clip, bobbin cradle, toolset etc) that you'll buy anywhere else. We sell it for less because we love you so much and because we think it's the best bang for your buck.

NOTE #2: Due to its relative heavy weight, the Mongoose does not qualify for free shipping.

Rite Bobbin - Standard

RB2

Regular price $34.99

Shipping calculated at checkout.

The Rite Bobbin is probably the most popular adjustable tension bobbin on the market today. Easily adjust tension depending on thread and pattern needs. This eliminates the need to bend and shape your traditional style bobbins to create the needed tension for perfect thread control.

Griffin Supreme Ceramic Bobbin

GT6

Regular price $19.49

Shipping calculated at checkout.

The Griffin Supreme Ceramic Bobbin is one of the best bobbins for the money. If you're not tying with a ceramic bobbin and are tired of thread break-offs, this is the bobbin for you! This specific bobbin accounts for nearly 90% of our current personal bobbin use.

Dr. Slick Razor Scissors - 4"

DRS55

Regular price $36.99

Shipping calculated at checkout.

Arguably one of the best pairs of fly tying scissors on the planet. Super sharp, great for cutting with fine detail.

Loon D-Loop Tweezer

F1004

Regular price $12.99

Shipping calculated at checkout.

An oversized tweezer that does everyting from picking up hooks and beads, retaining materials for even the largest dubbing loops/composite loops, and holding materials for dubbing brushes.

Loon Ergo Quick Cut Whip Finisher

F1001

Regular price $12.99

Shipping calculated at checkout.

The classic whip finisher with a powder coated ergonomic body. The base of the tool has been sharpened, so that finishing flies and clipping thread can be accomplished with one single tool.

FEATURES:

Ergonomic thumb/finger grip system on barrel
Sharpened edge for cutting thread etc
Powder coated handle

Stonfo Dubbing Loop Clip Set

FO634MICRO

Regular price $21.99

Shipping calculated at checkout.

Stonfo dubbing loop clips help you tame materials and help you insert them into a dubbing loop. Works great with CDC, smaller fiber dubbings, deer hair or anything else you might want to throw into a dubbing loop.

Large = 2" and Small = 1" wide.

Pair these with either the Stonfo thread splitter or the Turbo Dubbing Spinner and you'll be cranking out buggy bodies like a boss.

2 Equal-sized clips per set

Dubbing Wax

TDW1

Regular price $7.99

Shipping calculated at checkout.

Touch Dubbing Wax. This is a tacky and effective dubbing wax to help you get a little more "stick" on your thread to allow dubbing fibers to cling better. Comes in an easy-to-apply tube.

Stonfo Pinza Elite Hackle Pliers

FO577

Regular price $15.99

Shipping calculated at checkout.

The Stonfo Pinza Elite Hackle Pliers are spring-loaded with great holding power. You can easily wrap hackle, tinsel, thread, biots or whatever else you might need to get a handle on.

The micro size is best for hooks smaller than #16. Standard size best for hooks #14 and larger.

Stonfo Elite Disc Drag Bobbin

FO528

Regular price $28.99

Shipping calculated at checkout.

You pay a little more for this bobbin, but it features a smooth and adjustable disc drag system to apply and keep the perfect amount of tension on the thread spool as you tie. Not only is this a very lightweight bobbin, the thread tube is as smooth as they come. Minimal thread breakage....

Griffin Hook & Hackle Gauge

GT30

Regular price $7.50

Shipping calculated at checkout.

The Griffin Hackle Gauge allows you to accurately measure hook gapes and hackle feather sizes.

Loon Razor Scissors - 4"

F0988

Regular price $24.99

Shipping calculated at checkout.

Appropriately named, this is a razor sharp pair of scissors. One of the straight blades is serrated, and the other is non-serrated, aiding in grabbing of materials to eliminate material slip. The knurled tension knob allows for adjustments to specific applications.

4″ scissors

Hand-honed in the USA

Knurled tension knob

Blades: one smooth one serrated

Powder coated grip

Ultimate Dubbing Brush

UDB

Regular price $5.50

Shipping calculated at checkout.

The Ultimate Dubbing Brush is a great tool to pick out and brush out your dubbed bodies. It also works well to tame clipped and stacked dubbings and wool bodies or heads.

Loon Ergo Bobbin

F0980

Regular price $19.99

Shipping calculated at checkout.

An ergonomic and high-performing update to the indispensable tying tool. The powder coated ergonomic handle rests perfectly between the thumb and fingers, while the spring steel spool holder allows for easy adjustment in tension by changing the pressure applied by grip. The tube is designed with versatility in mind: the high gauge works well when tying small flies, and the tube is long enough to tackle large patterns as well.

Loon Ergo All Purpose Scissors - 4"

F0978

Regular price $15.99

Shipping calculated at checkout.

Re-designed for 2016, these precision scissors now have a new ergonomic design and stainless steel blades. An excellent choice for quality and comfort.

Enlarged ergonomic finger/thumb holes
Hand-tuned in the USA
4″ long
Surgical quality stainless steel
Excellent all-around scissors
Powder coated grip
Extra sharp cutting blades

Griffin Bobbin Threaders

GT37

Regular price $6.99

Shipping calculated at checkout.

Threaders help you get your thin threads through your bobbin tube and ready to tie. This is a must-have tool! 3 per pack.

Fly Tying Wax Skull

FTWS

Regular price $6.95

Shipping calculated at checkout.

Fly tying wax in the shape of a skull for extra mojo. From the bench of Barry Ord Clarke, this tying wax is a great addition to the bench.

Apart from the obvious advantages of using wax to make tying easier with natural threads such as cotton and silk more durable, waxing your own thread makes easy work of applying and attaching materials to the hook, creating better friction between thread and material and anchoring them in place with only a couple of wraps of thread. Its also extremely useful when dubbing, if a little is applied to the thread before spinning your dubbing it will render the thread ‘Tacky’ and make the adhering of the dubbing material easier.

Tiemco Midge Whip Finisher

30919

Regular price $24.95

Shipping calculated at checkout.

The Tiemco midge finisher is a compact whip finish tool that is perfect for finishing off small flies. At roughly half the size of a standard whip finish tool the midge version gives more accuracy and control when whip finishing on a smaller head. Perfect for finishing flies size 16 or smaller but we actually use it for flies of all sizes. Precision thread control!

Dr. Slick Brass Dubbing Comb and Brush

DRS91

Regular price $14.75

Shipping calculated at checkout.

This is a do-it-all dubbing brush. It has the stronger stiffer bristles on one end down to flattened edges with velcro on the other.